Memorial Day BBQ Candles!

Easy and cheap~Tin can Memorial Day candles!

I WAS LOOKING for fun things for Memorial Day, and came across a great way to recycle tin cans and as Grandma Jessie used to say, “shed a little light on the subject . . .”

Now, I ask you, how cute are these?

Whatcha Need:

Empty vegetable or soup cans, cleaned out and labels removed

• Water
• Nail
• Hammer
• Scrap paper
• Ruler
• Tape
• Spray paint in red, white, and blue

1.  Begin the tin can luminaries by filling the cans up to the top with water, then place them in the freezer until the water is frozen solid.  This will allow you to hammer a nail into the side of the can without the can denting.

2.  Next, think about some designs you want to punch into the sides of the can.  I chose to punch the letters USA, a star, and some fireworks.   Cut out your templates, place on the can, and trace around them with a permanent marker (or draw freehand).

3.  Continue making the tin can luminaries by using a nail and hammer to punch out the design.  Start at one end of the pattern and place the nail along the line.  Gently pound the nail in with a hammer.  The nail will go through the can into the ice.  Continue working around the pattern until the design is punched out.

4.  Allow the ice in the can to melt, and dry the can completely.
5.  Next, you can paint the cans if you wish although I think they look great plain silver too.  Spray the bottom portion of the cans blue with the blue spray paint.  Protect your work surface with newspapers and use good ventilation (preferably outdoors like I did).

6.  When the cans are completely dry, cut a piece of scrap paper to wrap around the can.  Make it 1/3 the height of the can.  The cans I used were 4.5 inches high, so I made my first strip of paper 1.5 inches.  Wrap the paper around the bottom part of the can, covering the blue painted area, and tape it closed.

7.  Now take the cans outside again and this time give them a good spray of the white spray paint, and allow the cans to dry well.

8.  Next, make another paper strip 2/3 the height of the can.  In my case, I made the strip of paper 3 inches wide.  Secure around the blue and white portions of the can, leaving only the top portion exposed, and secure with tape. Take the cans outside again and this time spray the top section with the red spray paint, and allow to dry.  Remove the paper strip and you will see the pretty red, white, and blue stripes.

9.  When you are ready to light up your tin can candles, add a little sand to weigh down the cans and add a tea light candle.

Templates: Click & Print!

This tutorial comes courtesy of Crafts for all Seasons